Skip to content
Contact

Fluidzon / Spare parts

Schwab UP 180

Explore the drawing and original articles. Confirm the model and installation generation before selecting a replacement.

Schwab UP 180 model reference

Model reference

Schwab UP 180

14 listed components

Cistern documents
Authorized partner for Schwab service & spare parts

Explore the assembly.

Select a position on the drawing, or find your article below.

14 listed components
Explore flush plate designs & finishes →

Select a drawing position below, or open the drawing to zoom.

Schwab UP 180 manufacturer exploded parts diagram

Drawing positions

Schwab UP 180 / replacement articles

Every part, in view.

Check the article code, cistern generation and connection before ordering.

14 of 14 components

1
Flush valve with gasket, cistern 180
228560
2
Set holder and release lever
231613
3
Flush pipe elbow 300 x 70 mm, white, view 1 of 2
1 / 2
382059
4
Holder, cistern 180, 182, 188
239889
5
Flange gasket for flush valve
351517
6
Gasket for flush pipe
352277
7
Flush valve holder with O-ring
352281
8
Flushing pipe elbow with att., L=300 mm
359793
9
Connecting tube without stop valve (up to 02/2014)
359807
10
Fill valve holder, cistern 180
359814
11
Holder
363802
12
Protection cover, cisterns 180, 183, 184, view 1 of 2
1 / 2
363817
13
Set fill valve 182, 188, 180, 189
675100

Not marked on the drawing

14
Spare parts set, cistern 180
363653N

Not marked on the drawing

Flush plates & finishes

Schwab UP 180 / flush plates

Choose the design. Then the finish.

Match the plate mechanism and installation generation before ordering. Current availability and the correct generation are confirmed on enquiry.

GALA, Matt chrome, 227702

2. Finish

227702
  • Matt chrome
  • Plastic
  • start-stop
  • mechanical

GALA · Matt chrome

Dimensions
345 x 180 x 32 mm (published Length x Width x Height)
Material
Plastic
Operation
start-stop
Mechanism
mechanical
Actuation
front
EAN
3838912034625
Generation & required hardware

180.000: 1992-1997 (P-IX3462/I), 1997-1998 (P-IX8155/I); 180.0400 since 1999. Native start-stop.

Native start-stop assembly: I6 bracket 231613; I2 bridge 239889 from 03/1995 or I2.1 bridge 359814 with lever 05/1993-03/1995. No plate revision date published.

Exact plate mechanism must match; no manufacturer plate revision/cutover date found.

Enquire about this plate ↗
Cistern documents

Cistern drawings and documents

Troubleshooting: find the cause, match the part

Model support

Check the cause. Match the article.

These are inspection references from this model’s parts list, not a diagnosis or a guarantee that replacement is needed. Confirm the generation and drawing position.

Water continues into the bowl

Check the outlet seal and valve seating, fill shut-off and plate adjustment before selecting a replacement.

Slow refill or valve noise

Check supply isolation, filter and fill valve condition. Match the connection thread and installation generation.

Button loose or not operating

Check the plate mechanism, rods and holders against the model drawing; plate design alone does not establish compatibility.

    Use the drawing and request identification before ordering.

    Technical support · UAE

    The right part starts with the right model.

    Send a photo of the cistern label, the valve or the old part, plus the year it was installed. We confirm the right article and availability.

    Prepare support enquiry Prefer email? [email protected]
    Identify my part