
Fluidzon / Spare parts
Schwab UP 188
Explore the drawing and original articles. Confirm the model and installation generation before selecting a replacement.
Explore the assembly.
Select a position on the drawing, or find your article below.
Select a drawing position below, or open the drawing to zoom.

Drawing positions
Schwab UP 188 / replacement articles
Every part, in view.
Check the article code, cistern generation and connection before ordering.
13 of 13 components













Not marked on the drawing
Flush plates & finishes
Schwab UP 188 / flush plates
Choose the design. Then the finish.
Match the plate mechanism and installation generation before ordering. Current availability and the correct generation are confirmed on enquiry.

2. Finish
- gloss chrome
- dual flush
- mechanical
POINT DUO · gloss chrome
- Operation
- dual flush
- Mechanism
- mechanical
- EAN
- 3838912034700
Generation & required hardware
188.0400 since 2008; dual flush or start-stop. Fill-valve revision 02/2014 is not a plate change.
Existing I2 bridge 239889 and I5 bearing bracket 231613 with setting lever; mounting/operating parts must match exact plate variant. Additional kit not specified.
Exact plate mechanism must match; no manufacturer plate revision/cutover date found.
Cistern documents
Cistern drawings and documents
Troubleshooting: find the cause, match the part
Model support
Check the cause. Match the article.
These are inspection references from this model’s parts list, not a diagnosis or a guarantee that replacement is needed. Confirm the generation and drawing position.
Fill valve generation boundary
For installations from 1999–February 2014, Schwab’s conversion table maps the old 243292 fill valve to replacement set 675100. The later generation uses 628458; check the model drawing and connection before ordering. A loose valve is not automatically a substitute for the complete conversion set.
Confirm the existing thread, holder, tube and required fittings. Installations near the changeover date need the actual cistern label and mechanism checked.
Schwab conversion-table reference ↗Water continues into the bowl
Check the outlet seal and valve seating, fill shut-off and plate adjustment before selecting a replacement.
- 228578 — Flush valve with gasket, cisterns 182, 188
Drawing position 1 · Listed by Schwab for Schwab UP 188. Confirm the installation generation and connection before ordering.
- 351517 — Flange gasket for flush valve
Drawing position 5 · Listed by Schwab for Schwab UP 188. Confirm the installation generation and connection before ordering.
- 628458 — Fill valve HDV G 3/8 brass
Drawing position 11 · Listed by Schwab for Schwab UP 188. Confirm the installation generation and connection before ordering.
- 675100 — Set fill valve 182, 188, 180, 189
Drawing position 13 · Listed by Schwab for Schwab UP 188. Confirm the installation generation and connection before ordering.
Slow refill or valve noise
Check supply isolation, filter and fill valve condition. Match the connection thread and installation generation.
- 359807 — Connecting tube without stop valve (up to 02/2014)
Drawing position 8 · Listed by Schwab for Schwab UP 188. Confirm the installation generation and connection before ordering.
- 628458 — Fill valve HDV G 3/8 brass
Drawing position 11 · Listed by Schwab for Schwab UP 188. Confirm the installation generation and connection before ordering.
- 628459 — Connecting tube without stop valve (from 02/2014)
Drawing position 12 · Listed by Schwab for Schwab UP 188. Confirm the installation generation and connection before ordering.
- 675100 — Set fill valve 182, 188, 180, 189
Drawing position 13 · Listed by Schwab for Schwab UP 188. Confirm the installation generation and connection before ordering.
Button loose or not operating
Check the plate mechanism, rods and holders against the model drawing; plate design alone does not establish compatibility.
Use the drawing and request identification before ordering.
Technical support · UAE
The right part starts with the right model.
Send a photo of the cistern label, the valve or the old part, plus the year it was installed. We confirm the right article and availability.
