Skip to content
Contact

Fluidzon / Spare parts

Schwab UP 190

Explore the drawing and original articles. Confirm the model and installation generation before selecting a replacement.

Schwab UP 190 model reference

Model reference

Schwab UP 190

10 listed components

Cistern documents
Authorized partner for Schwab service & spare parts

Explore the assembly.

Select a position on the drawing, or find your article below.

10 listed components
Explore flush plate designs & finishes →

Select a drawing position below, or open the drawing to zoom.

Schwab UP 190 manufacturer exploded parts diagram

Drawing positions

Schwab UP 190 / replacement articles

Every part, in view.

Check the article code, cistern generation and connection before ordering.

10 of 10 components

1
Actuating lever with a bracket set
234116
2
Flush valve with gasket, cisterns 190, 192
239336
3
Front protection cover, cisterns 190, 192
239337
4
Flange gasket for flush valve
351517
5
Gasket for flush pipe
352277
6
Holder
363802
7
Connecting tube without stop valve (up to 02/2014), view 1 of 2
1 / 2
363814
8
Fill valve holder, cisterns 190, 192
363823
9
Flush pipe elbowArticle GR-S113-0250
GR-S113-0250
10
Fill valve 190, 192, view 1 of 2
1 / 2
675104
Flush plates & finishes

Schwab UP 190 / flush plates

Choose the design. Then the finish.

Match the plate mechanism and installation generation before ordering. Current availability and the correct generation are confirmed on enquiry.

GALA, Matt chrome, 227702

2. Finish

227702
  • Matt chrome
  • Plastic
  • start-stop
  • mechanical

GALA · Matt chrome

Dimensions
345 x 180 x 32 mm (published Length x Width x Height)
Material
Plastic
Operation
start-stop
Mechanism
mechanical
Actuation
front
EAN
3838912034625
Generation & required hardware

190.000 since 1997; 190.0400 1999-2003; start-stop.

Existing I5 bearing bracket 234116 with setting lever; A2 cover 239337. Start-stop only in inspected model specification.

Exact plate mechanism must match; no manufacturer plate revision/cutover date found.

Enquire about this plate ↗
Cistern documents

Cistern drawings and documents

Troubleshooting: find the cause, match the part

Model support

Check the cause. Match the article.

These are inspection references from this model’s parts list, not a diagnosis or a guarantee that replacement is needed. Confirm the generation and drawing position.

Water continues into the bowl

Check the outlet seal and valve seating, fill shut-off and plate adjustment before selecting a replacement.

Slow refill or valve noise

Check supply isolation, filter and fill valve condition. Match the connection thread and installation generation.

Button loose or not operating

Check the plate mechanism, rods and holders against the model drawing; plate design alone does not establish compatibility.

Technical support · UAE

The right part starts with the right model.

Send a photo of the cistern label, the valve or the old part, plus the year it was installed. We confirm the right article and availability.

Prepare support enquiry Prefer email? [email protected]
Identify my part