Skip to content
Contact

Fluidzon / Spare parts

Schwab UP 199

Explore the drawing and original articles. Confirm the model and installation generation before selecting a replacement.

Schwab UP 199 model reference

Model reference

Schwab UP 199

10 listed components

Cistern documents
Authorized partner for Schwab service & spare parts

Explore the assembly.

Select a position on the drawing, or find your article below.

10 listed components
Explore flush plate designs & finishes →

Select a drawing position below, or open the drawing to zoom.

Schwab UP 199 manufacturer exploded parts diagram

Drawing positions

Schwab UP 199 / replacement articles

Every part, in view.

Check the article code, cistern generation and connection before ordering.

10 of 10 components

1
Cover plate
GR0688S
2
Gasket for flush pipe
352277
3
Flush pipe elbowArticle GR-S113-0250
GR-S113-0250
4
Fill valve 747 G 3/8 brass, holder, view 1 of 2
1 / 2
747E-036-P20
5
Connecting tube
GR0232S
6
Bridge, cistern 199, 299
GR-S20S
7
Flush valve, view 1 of 2
1 / 2
GR-S350-0250
8
Flush valve rubber gasket 59 x 23,4 x 4,2 mm
GR-S391-0250
9
Fill valve holderArticle GR-S182
GR-S182
10
Flush valve holder, cisterns 199, 299
GR-S190
Flush plates & finishes

Schwab UP 199 / flush plates

Choose the design. Then the finish.

Match the plate mechanism and installation generation before ordering. Current availability and the correct generation are confirmed on enquiry.

Component photo unavailableALTHEA IR CONTROL KIT, white, P69-0130-0250

Original catalogue photo · limited resolution

2. Finish

P69-0130-0250
  • white
  • high quality plastic
  • dual flush
  • electronic infrared

ALTHEA IR CONTROL KIT · white

Dimensions
247 x 160 x 10.5 mm
Material
high quality plastic
Operation
dual flush
Mechanism
electronic infrared
EAN
8681282657995
Generation & required hardware

Year range not published in inspected compatibility sources; standard 199. Pneumatic conversion is a separate configuration.

Complete ALTHEA IR control kit P69-0130-0250 includes lifting unit and fixing parts; approved power supply ordered separately. Manufacturer confirms 199 series; no installation-year cutoff or standalone interchangeability statement found.

Exact plate mechanism must match; no manufacturer plate revision/cutover date found.

Enquire about this plate ↗
Cistern documents

Cistern drawings and documents

Troubleshooting: find the cause, match the part

Model support

Check the cause. Match the article.

These are inspection references from this model’s parts list, not a diagnosis or a guarantee that replacement is needed. Confirm the generation and drawing position.

Model 199 holder reference

GR-S182 is the holder reference listed for model 199. Its code does not establish compatibility with model 182. The exact supplied kit contents still require confirmation.

Water continues into the bowl

Check the outlet seal and valve seating, fill shut-off and plate adjustment before selecting a replacement.

Slow refill or valve noise

Check supply isolation, filter and fill valve condition. Match the connection thread and installation generation.

Button loose or not operating

Check the plate mechanism, rods and holders against the model drawing; plate design alone does not establish compatibility.

Technical support · UAE

The right part starts with the right model.

Send a photo of the cistern label, the valve or the old part, plus the year it was installed. We confirm the right article and availability.

Prepare support enquiry Prefer email? [email protected]
Identify my part